Yakima Siding Pro is based in Wapato, fifteen minutes from Yakima, and led by founder and project director Julio Reyes. We install, repair and replace siding on homes and commercial buildings across the Yakima Valley, and we handle everything that goes with it: soffit and fascia, exterior trim, doors and windows, roofing and exterior painting. One crew, one written quote, one point of contact.
A written schedule before we start, a daily update with photos while we work, and a phone that gets answered. You always know what is happening on your house.
A Wapato-based, licensed, bonded and insured contractor with a vetted crew that works in the Yakima Valley every day. We are here when you need us, during the job and after.
Weather barrier, flashing, fasteners, gaps and clearances done the way the siding maker requires, because that is what keeps water out of a Yakima wall for thirty years.
Free, in-person, written and itemized. We show you material options side by side with real prices, and financing is available when you want to spread the cost.
Every service below gets the same in-person quote, written scope, daily communication and clean job site, on single-family homes, manufactured homes, rentals, apartments and commercial buildings.
New siding on new builds, additions and homes being re-sided, installed to the manufacturer specification so it stays tight through Yakima heat and winter freeze.
Learn moreCracked, loose, warped or rotten siding fixed and matched so the repair disappears, with the cause fixed too.
Learn moreOld siding off, rot fixed, new barrier and flashing in, new siding on. The upgrade that protects the house and changes how it looks.
Learn moreOur top recommendation for Yakima: rot-proof, fire-resistant and stable through heat and freeze, installed to spec.
Learn moreHardiePlank, HardiePanel and HardieShingle with ColorPlus finishes, installed to Hardie installation requirements.
Learn moreThe budget-friendly choice, installed with the expansion room and locking that keep it flat through a Yakima summer.
Learn moreThe roof-line finish that keeps attics ventilated and gutters attached to solid wood, repaired or replaced to match the siding.
Learn moreWindow and door surrounds, corner boards, belly bands and gable accents that turn plain siding into a finished exterior.
Learn moreReplacement windows, entry doors and patio doors flashed into the wall correctly, ideally with the siding so the openings work as one system.
Learn moreArchitectural shingle and metal roof replacement and repair, coordinated with soffit, fascia and siding so the whole envelope works together.
Learn morePrep, repair and UV-rated paint on siding, trim and doors, by a crew that fixes what is under the paint first.
Learn moreApartments, multi-family, offices, schools, shops and warehouses sided on schedule with minimal disruption.
Learn moreBecause here the enemy is not rain. It is sun, heat, wind and freeze.
Yakima gets close to 300 days of sun a year, summers that pass 100 degrees, winter nights in the teens and only about eight inches of rain. That swing from baking heat to hard freeze moves siding more than the wet side of the state ever does. Vinyl nailed tight buckles in July. Fiber cement cut and left unsealed cracks at the nails. Wood without a UV-rated finish checks and splits in our dry air.
Every one of those failures is an installation detail written in the manufacturer guide. We install to that guide on every wall, and we choose materials and colors for the sun-facing side of your house. Here is what we are usually called for:
Four steps from first call to finished exterior, with photos and updates at every stage.
We measure the house, check the sheathing and trim for rot, go over materials and colors with you, and leave you with a written, itemized quote.
You pick the material, profile and color. We order everything, pull any permit and give you a written schedule before the first panel comes off.
Landscaping protected, rot repaired, barrier and flashing done right, siding and trim installed to the manufacturer specification, with photo updates every day.
Every scrap and nail hauled away, a final walk around the house with you, and a crew that is a phone call away afterward.
Google reviews from siding, trim, window, door and roofing projects across Yakima, the Lower Valley, Ellensburg and the Tri-Cities.
Based in Wapato and working across the Yakima Valley every day, with regular trips to Ellensburg and the Tri-Cities. Pick your town for local details, or see every area we serve.
Straight answers on cost, materials, timing and financing. Have a different question? Ask us and we will answer within one business day.
Most full siding replacements in the Yakima Valley land between the low teens and the high twenties in thousands of dollars, depending on the size of the house, how much rot we find under the old siding, the material you choose and how much trim, soffit and fascia is replaced with it. Vinyl is the lowest cost, fiber cement and James Hardie sit in the middle, and cedar or custom wood costs the most. Every quote from Yakima Siding Pro is free, written and itemized.
Fiber cement, including James Hardie, is the best all-round choice for Yakima. It shrugs off our 100 degree summers, strong UV, winter freeze and thaw, wind and dust, and it does not warp, rot or feed insects. Vinyl is a good budget option if it is a quality thickness installed with room to expand. Wood and cedar look beautiful but need regular staining in our dry climate.
Yes. Yakima Siding Pro offers financing on siding, window, door, roofing and exterior painting projects so you can spread the cost over time. Ask for the current options when you request your quote.
A typical single-family home in Yakima takes one to two weeks from tear-off to final trim and cleanup. Larger homes, two-story houses, extensive rot repair or combined siding and window projects take longer. We give you a written schedule before we start and keep you posted every day.
Yes. Along with single-family homes we side apartments, duplexes, schools, warehouses, shops and office buildings across Yakima and Central Washington. Commercial projects get the same crew, the same communication and the same cleanup as our residential work.
We are based in Wapato, minutes from Yakima, and serve the whole Yakima Valley, including Union Gap, Selah, Terrace Heights, Moxee, Naches, Toppenish, Zillah, Sunnyside, Grandview and Prosser, plus Ellensburg, the Tri-Cities and larger projects across Washington.
Siding materials, exterior trends and what works in the Central Washington climate.
Tell us about the house and what you are looking for. We reply within one business day and schedule a free in-person visit.
